7: Networking
EMG™ Edge Management Gateway User Guide
103
Figure 7-6 Network > Wireless Settings > WLAN Profiles
3. To add a new profile click
Add Profile
, or to edit an existing profile, select a profile and click
View/Edit Profile
button.
4. Enter the following information:
Profile Name
Profile name, up to 32 characters long. Valid characters are letters,
numbers, space ( ), dash (-), period (.) and underscore (_).
Network Name (SSID)
Enter the Service Set Identifier or network name for the WLAN network.
The SSID can contain up to 32 characters (the characters '/', '\', '"' and
'|' are not allowed).
State
The state of the profile; only
Enabled
profiles can be used to connect
to a WLAN network.
Priority
The priority of the profile, which is a number from 1 to 4. When
choosing a profile to connect with, profiles with higher priority values
are given precedence over priorities with lower priority values.
Summary of Contents for EMG Series
Page 100: ...7 Networking EMG Edge Management Gateway User Guide 100 Figure 7 5 Network Wireless Settings...
Page 353: ...15 Maintenance EMG Edge Management Gateway User Guide 353 Figure 15 12 About EMG...
Page 474: ...EMG Edge Management Gateway User Guide 474 Figure E 3 EU Declaration of Conformity...
Page 475: ...EMG Edge Management Gateway User Guide 475 Figure E 4 EU Declaration of Conformity continued...
