Web-Manager Configuration
WiBox2100E User Guide
31
Figure 4-3. Server Settings
To configure the WiBox’s device server settings:
1. Click
Server
from the main menu.
2. Configure or modify the following fields:
Server Configuration
Telnet Password
Enter the password required for Telnet access.
Retype Password
Re-enter the password required for Telnet access.
Advanced
ARP Cache Timeout
When the unit communicates with another device on the
network, it adds an entry into its ARP table. ARP Cache
timeout defines the number of seconds (1-600) before it
refreshes this table.
TCP Keepalive
TCP Keepalive time defines how many seconds the unit waits
during an inactive connection before checking its status. If the
unit does not receive a response, it drops that connection.
Enter a value between
1
and
65
seconds.
0
disables
keepalive. The default setting is
45
.
Monitor Mode @ Bootup
Select
Disable
to disable the entry into the monitor mode via
the
yyy
or
xx1
key sequence at startup. This command
prevents the unit from entering monitor mode by interpreting
the stream of characters that are received during the device
server's initialization at startup.
