Web-Manager Configuration
WiBox2100E User Guide
36
At Time of Disconnect
Select
Yes
to clear the input buffer when the network
connection to or from the device is disconnected. The default
setting is
No
.
Flush Output Buffer (Network to Serial)
With Active Connect
Select
Yes
to clear the output buffer with a connection that is
initiated from the device to the network. The default setting is
No
.
With Passive Connect
Select
Yes
to clear the output buffer with a connection initiated
from the network to the device. The default setting is
No
.
At Time of Disconnect
Select
Yes
to clear the output buffer when the network
connection to or from the device is disconnected. The default
setting is
No
.
3. When you are finished, click the
OK
button.
4. On the main menu, click
Apply Settings
.
Connection Settings - TCP
To configure a channel’s TCP settings
:
1. From the main menu, click
Connection
for either Channel 1 or Channel 2 to
display the Connection Settings page for the selected channel.
2. In the available fields, enter the following information:
Connect Protocol
Protocol
Select
TCP
from the pull-down menu.
