Installation
12
ETS Installation Guide
ETS32PR Front Panel
The ETS32PR has 32 RJ45 serial ports, a Reset button, an AUI Ethernet port, an
RJ45 Ethernet port for 10/100BASE-T, several status LEDs, and a power switch.
Figure 2-5. ETS32PR Front Panel
Note:
The first RJ45 port is also the serial console port. Use it as a method
for the initial setup or troubleshooting.
ETSPR LEDs
Each ETSPR has a total of 37 LEDs. Each serial port has one (ETS32PR) or two
(ETS16PR) corresponding LEDs that indicate receive and transmit activity, and there
are five status LEDs on the right side of the case.
Table 2-2. ETSPR Port LED Functionality
LED
Function
activity
Blinks to indicate Ethernet activity
ok
Blinks to indicate that the ETS is functioning
properly
100
Lights to indicate a 100BASE-T rather than
10BASE-T Ethernet link
link
Lights to indicate a functional Ethernet
network link
power
Lights to indicate the ETS has power
Installing the ETSPR
The following diagram shows a properly-installed ETS16PR. Installation will generally
be the same for all ETSPR models, the only difference being the number of serial
ports available. See
ETSPR Product Descriptions
on page
11
for more information.
