Lantronix
ION001-A Install Guide
33419 Rev. E
9
Compliance Information
Declaration of Conformity
Manufacture’s Name: Lantronics, Inc.
Manufacture’s Address: 48 Discovery, Suite 250, Irvine, California 92618 USA
Declares that the products: ION001-A Series Single-Slot Chassis ION-001A
Conforms to the following Product Regulations:
EMC Directive 2004/108/EC; EN 55022:2006+A1:2007 Class A;
EN55024:1998+A2:2003; EN61000-3-2; EN6100-3-3; CFR Title 47 Part 15 Subpart B Class A;
Low Voltage Directive: 2006/95/EC
With the technical construction on file at the above address, this product carries the CE Mark
I, the undersigned, hereby declare that the equipment specified above conforms to the above
Directive(s) and Standard(s).
Place: Irvine, California
Date: April 27, 2022
Signature:
Fathi Hakam
Full Name: Fathi Hakam
Position: Vice President of Engineering
FCC Regulations
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference. In which case, the user will be
required to correct the interference at the user’s own expense.
