MatchPort Demonstration Kit Quick Start
9
Connecting a MatchPort Device—Serial Method
In the event that the equipment required for a network
connection is not available for the initial configuration of the
MatchPort, the serial method can be used.
1. Connect one end of the supplied DB9F/F serial cable to the
serial port on the laptop or desktop.
2. Connect the other end of the supplied DB9F/F serial cable
to Port 1 on the MatchPort.
3. Select the appropriate power plug adaptor for your
geographical location. Insert it into the slot on the Universal
Power Supply; then plug the power supply into an outlet.
4. Connect the output plug of the power supply to the
MatchPort Evaluation Board.
The final serial connection setup should look like this:
5. Move the power switch on the Evaluation Board to
ON
.
This is the last step in 'connection.' The MatchPort is ready for configuration
