2: Description and Specifications
Micro125 Embedded Device Server Integration Guide
12
Product Information Label
The product information label contains important information about your specific unit,
such as its product number, revision number, manufacturing date and mac address.
Figure 2-7 Product Label
Technical Specifications
Table 2-3 Micro125 Technical Specifications
Category
Description
CPU, Memory
Lantronix DSTni-EX 186 CPU, 256-Kbyte zero wait state SRAM, 512-Kbyte flash,
16-Kbyte boot ROM
Firmware
Upgradeable via TFTP and serial port
Serial Interface
2 TTL serial interfaces (Asynchronous).
5V-level input signals. 3.3 V-level output signals. Through-hole plated pins, DIL.
Note:
the reset input is 3.3V tolerant.
Serial Line Formats
Data bits: 7 or 8
Stop bits: 1 or 2
Parity: odd, even, none
Board Dimensions
Height: 1.575in (40.00 mm)
Width: 1.935in (49.15 mm) (See Drawing)
Weight
0.7 ounces
Modem Control
DTR, RTS, CTS, DCD
Flow Control
XON/XOFF (software), CTS/RTS (hardware), None
Network Interface
RJ45 (10/100Base-T) Ethernet
Compatibility
Ethernet: Version 2.0/IEEE 802.3
Power Requirements
5VDC (±5%) regulated @ 210mA
Protocols Supported
ARP, UDP/IP, TCP/IP, Telnet, ICMP, SNMP, DHCP, BOOTP, TFTP, Auto IP, and
HTTP
LEDs
Channel 1 (solid Green = idle, blink = active)
Channel 2 (solid Yellow = idle, blink = active)
Diagnostics (Red, in combination with Channel 1)
Network Link (Green)
Management
Internal web server, SNMP (read only)
Serial login, Telnet login
Security
Password protection, optional Rijndael 256-bit encryption
Internal Web Server
Serves static Web pages and Java applets
Storage capacity: 384 Kbytes
Temperature
Standard Temperature Operating Range: 0° to 70°C (32° to 158°F)
Revision Number
MAC Address
Part Number
Manufacturing Date
