Lantronix
OCA-P181610 Install Guide
33812 Rev. D
Page
4
of
17
Product Description
The Lantronix Outdoor Cabinet Assembly is a high impact resistant polycarbonate enclosure with a hinged cover
that permits a 225° door swing and allows for easy door removal during installation or maintenance. The door is
secured by two stainless steel latches that are bolted in place (providing more security than pop rivets or slide-on
latches) and can be further secured with pad locks (not included). The 18” x 16” x 10” cabinet is deep enough to
protect the bend radius of fiber cables connected to nearly any Lantronix temperature hardened switch when
mounted in the enclosure. A liquid tight vent is included to prevent condensation inside the enclosure.
Inside the cabinet, the OCA-P181610 includes two 15” DIN rails for easily mounting switches, media converters,
power supplies and other communications equipment (sold separately). One entry port for routing power wires (a
receptacle can be added) and 10 data cable entry ports with cord grips (each data cord grip accommodates two
cables) are pre-installed in the cabinet. The enclosure also includes a ground terminal block with four push-in
connections on each DIN rail to protect against lightning or other surges in power to the enclosure. Red and black
feed-through terminal blocks are provided for terminating low voltage DC positive and negative wires within the
enclosure. Blue and white feed-through terminal blocks are provided for AC mains line and neutral/line
connections. End caps are also included for added safety.
The enclosure includes mounting feet for mounting on a wall or side of a building. Optional brackets are available
for mounting on 2-6" diameter poles. The optional EDCA-DIO-01 mounts easily on the DIN rails or to the side of
the cabinet with optional wall mount brackets. Optional fiber management trays (SESPM-4P-FMT) are available
for managing fiber cable, if needed.
Features
•
Light weight, high impact resistant polycarbonate cabinet
•
Wide swing or removable hinge for easy access
•
Bolted latches
•
Vent to prevent condensation inside the enclosure
•
Wall or pole mount (optional)
•
Enclosure door contact alarm (optional)
•
Fiber management trays (optional)
•
Wide operating temperature range
•
Made in USA
Specifications
Dimensions
Width: 16.91” x Depth: 11.5” x Height: 19.69”
Width: 429.51 mm x Depth: 292.1 mm x Height: 500.13 mm
Weight
15.15 lbs. [6.87 kg]
DIN Rails
(2) 1.39" x 15" [35 mm]
Instrumented Dart Impact @ 73°F
565 in lb
Deflection Temperature @ 264 psi 270°F
Modulus of Elasticity
34 ksi
Tensile Strength Temp. Range
-40 to 265°F
Environment Operating Temp.
-40° to +70°C (inside enclosure)
External Operating Temp.
-40°C to +50°C
Flame Rating – UL
94 5VA
Outdoor UV Exposure – UL
F1
