PremierWave® 2050 802.11ac Embedded Wi-Fi® User Guide
44
6: Diagnostics
Diagnostic settings for the PremierWave 2050 gateway can be viewed and modified under the
Diagnostics tab in the Web Manager user interface. This chapter describes the following
diagnostic settings:
DNS
The primary and secondary DNS addresses come from the active interface. DHCP or BOOTP can
override the static addresses from the network interface configurations.
To look up either the DNS host name or the IP address for an address, type the address or host
name in the field, then click Lookup.
This section describes the active run-time settings for the domain name system (DNS) protocol.
The primary and secondary DNS addresses come from the active interface. The static addresses
from the Network Interface configuration settings may be overridden by DHCP.
Table 6-1 DNS Settings
Accessing the DNS Settings
Using Web Manager
To view the current DNS name or IP address, on the
Diagnostics
page, click
DNS
.
To configure the DNS Settings, on the
Diagnostics
page, enter the name of a DNS host and
click
Lookup
.
Field/Button
Description
Lookup
Perform one of the following and click the
Lookup
button:
Enter an IP address, and perform a reverse Lookup to locate the host name for
that IP address
Enter a host name, and perform a forward Lookup to locate the corresponding
IP address.
