6: Diagnostics
PremierWave® 2050 802.11ac Embedded Wi-Fi® User Guide
45
Note:
If DNS information is not supplied by DHCP, configure Ethernet (eth0) internet
settings according to instructions at
Wired (eth0) Network (on page 30)
and configure
Wireless (wlan0) Network interface settings according to instructions at
.
Using CLI
To enter CLI command level:
enable > dns
Using XML
Not applicable.
Hardware
View the CPU type, CPU speed, RAM size and flash size of the hardware on this Web Manager
page.
To View Hardware Information
Using Web Manager
To view hardware information, on the
Diagnostics
page, click
Hardware
.
Using the CLI
To enter the command level:
enable > device, show hardware information
Using XML
Include in your file:
<statusgroup name= ¨hardware¨>
IP Sockets
You can view the list of listening and connected IP sockets.
To View the List of IP Sockets
Using Web Manager
To view IP Sockets, on the
Diagnostics
page, click
IP Sockets
.
Using the CLI
To enter the command level:
enable > show ip sockets
Using XML
Include in your file:
<statusgroup name=”ip sockets”>
