PremierWave® 2050 802.11ac Embedded Wi-Fi® User Guide
49
7: Administration
Administrative features for the PremierWave 2050 gateway are organized beneath the
Administration tab in the Web Manager user interface. This chapter describes the following
administrative settings:
CLI
The command line interface (CLI) settings allow you to control how users connect to and interact
with the command line of the PremierWave 2050 gateway. It is possible to configure access via
the Telnet and SSH protocols, in addition to general CLI options.
CLI Status and Configuration
View-only status information on the Command Line Interface Status page displays the current
Telnet and SSH server status, uptime, and current connections (if any.)
See
for the bridge settings that can be modified on the Command Line Interface
Configuration page.
Table 7-1 CLI Configuration Settings
Command Line
Interface Configuration
Settings
Description
Enable Level Password
Enter the password for access to the Command Mode Enable level. There is no
password by default.
Quit Connect Line
Enter the
Quit Connect Line
string to be used to terminate a Telnet and SSH
session and resume the CLI. Type <control> before the key to be pressed while
holding down the
[Ctrl]
key (example:
<control>L
)
