7: Administration
PremierWave® 2050 802.11ac Embedded Wi-Fi® User Guide
57
To View and Configure Line Configuration and Command Mode
Note:
The steps to view and configure Line 1 settings provided in this section are the
same for viewing and configuring Line 2.
Using Web Manager
To view line 1 statistics, on the
Administration
page, click
Line > Line 1 > Statistics
.
To configure line 1, on the
Administration
page, click
Line > Line 1 > Configuration
.
To configure line 1 command mode on the
Administration
page, click
Line > Line 1 >
Command Mode
.
Using the CLI
To enter the Line command level:
enable > line <number>
Using XML
Include in your file:
<configgroup name="line" instance=”1”>
Table 7-9 Create New Keys
SSL
Secure Sockets Layer (SSL) is a protocol that creates an encrypted connection between devices.
It also provides authentication and message integrity services. SSL is used widely for secure
communication to a Web server, and also for wireless authentication.
SSL certificates identify the PremierWave 2050 gateway to peers and are used with some
methods of wireless authentication. Provide a name at upload time to identify certificates on the
PremierWave 2050 gateway.
You can upload Certificate and Private key combinations, obtained from an external Certificate
Authority (CA), to the PremierWave 2050 gateway. The PremierWave 2050 gateway can also
generate self-signed certificates with associated private keys.
Credentials
The PremierWave 2050 gateway can generate self-signed certificates and their associated keys
for both RSA and DSA certificate formats. When you generate certificates, assign them a
credential name to help identify them on the PremierWave 2050 gateway. Once you create your
credentials, then configure them with the desired certificates.
To Create a New Credential
Using Web Manager
1. In Web Manager, click the
Administration
tab in the header.
2. Click
SSL
.
SSH Setting
Description
Submit (button)
Click the
Submit
button after changes are made in the above Create New Keys
fields.
