16: Maintenance and Diagnostics Settings
PremierWave® XC HSPA+ Intelligent Gateway User Guide
111
To Transfer or Modify Filesystem Files
Using Web Manager
To create a new file or directory, upload an existing file, copy or move a file, or view existing
files, click
Filesystem
in the menu and select
Browse
.
Using the CLI
To enter the Filesystem command level:
enable -> filesystem
Using XML
Not applicable.
Protocol Stack Settings
There are various low level network stack specific items that are available for configuration. This
includes settings related to IP, ICMP, ARP and SMTP, which are described in the sections below.
IP Settings
Table 16-5
IP Protocol Stack Settings
TFTP
Action
Select the action that is to be performed via TFTP:
Get
= a “get” command will be executed to store a file locally.
Put
= a “put” command will be executed to send a file to a remote
location.
Local File
Enter the name of the local file on which the specified “get” or “put” action is
to be performed.
Remote File
Enter the name of the file at the remote location that is to be stored locally
(“get’) or externally (“put”).
Host
Enter the IP address or name of the host involved in this operation.
Port
Enter the number of the port involved in TFTP operations.
Transfer (button)
Click the
Transfer
button after TFTP settings are entered.
Protocol Stack
IP Settings
Description
IP Time to Live
This value typically fills the Time To Live in the IP header. SNMP refers to this
value as "ipDefaultTTL"
Enter the number of hops to be transmitted before the packet is discarded.
File Transfer Settings
Description
