16: Maintenance and Diagnostics Settings
PremierWave® XC HSPA+ Intelligent Gateway User Guide
112
To Configure IP Protocol Stack Settings
Using Web Manager
To configure IP protocol settings, click
Protocol Stack
in the menu and select
IP
.
Using the CLI
To enter the command level:
enable -> config -> ip
Using XML
Include in your file:
<configgroup name=”ip”>
ICMP Settings
Table 16-6 ICMP Protocol Stack Settings
To Configure ICMP Protocol Stack Settings
Using Web Manager
To configure ICMP protocol settings, click
Protocol Stack
in the menu and select
ICMP
.
Using the CLI
To enter the command level:
enable -> config -> icmp
Using XML
Include in your file:
<configgroup name=”icmp”>
To View ICMP Protocol Stack Settings
Using Web Manager
To view ICMPv6 protocol settings, click
Protocol Stack
in the menu and select
ICMPv6
.
Multicast Time to Live
This value fills the Time To Live in any multicast IP header. Normally this value
will be one so the packet will be blocked at the first router. It is the number of
hops allowed before a Multicast packet is discarded.
Enter the value to be greater than one to intentionally propagate multicast
packets to additional routers.
Protocol Stack
ICMP Settings
Description
State
Click to enable or disable the processing of ICMP messages. This includes
both incoming and outgoing messages.
Protocol Stack
IP Settings (continued)
Description