6: Network Settings
PremierWave® Intelligent Gateway User Guide
45
To Configure Network 2 Interface Settings
Using Web Manager
To modify network 2 wwan0 interface information, click
Network
on the menu and select
Network 2 > Interface > Configuration.
Using the CLI
To enter the cellular command level:
enable -> config -> if 2
Using XML
Include in your file:
configgroup name = "cellular interface” instance =
“wwan0”>
Network 2 (Cellular “wwan0”) Link Settings
This page shows configuration of an wwan0 link on the device.
Table 6-7 Network 2 (wlan0) Link Settings
To Configure Network 2 Link Settings
Using Web Manager
To modify network 2 wwan0 interface information, click
Network
on the menu and select
Network 2 > Link > Configuration.
Using the CLI
To enter the link command level:
enable -> if 2 -> link
Using XML
Include in your file:
<configgroup name = "wwan0 link" instance = "wlan0">
Network 2 Link
Settings
Description
APN
Enter the configurable network identifier used by a mobile device when
connecting to a GSM carrier.
Username
Enter the
Username
for dial up to cellular carrier, if required.
Password
Enter the
Password
for dial up to cellular carrier, if required.
Dialup String
Enter the modem string used for making connection to carrier.
Roaming
Enable or disable the network roaming.
