5: Commands and Levels
clrscrn
Clears the screen.
connection
<instance>
Enters the next lower level. Specify the instance for the
next lower level.
default mode
Sets default of simultaneous connection mode.
exit
Exits to the next higher level.
mode sequential
Sets sequential mode; will stop after first connection that
goes through.
mode simultaneous
Sets simultaneous mode; will make all possible connec-
tions.
no reminder interval
Clears the HTTP Post reminder interval. HTTP Post is
sent once only.
reminder interval
<minutes>
Sets the HTTP Post reminder interval.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
write
Stores the current configuration in permanent memory.
icmp (config-icmp) level commands
clrscrn
Clears the screen.
exit
Exits to the configuration level.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
state disable
Prevents ICMP packets from being sent or received.
state enable
Allows ICMP packets to be sent and received.
write
Stores the current configuration in permanent memory.
if 1 (config-if:eth0) level commands
bootp disable
Disables BOOTP.
bootp enable
Enables BOOTP.
clrscrn
Clears the screen.
default gateway
<IP address>
Sets the configurable gateway IP address to the default
value.
default mtu
Restores the default Maximum Transmission Unit (MTU)
size.
default priority
Restores the default priority for the interface.
dhcp client id
<text>
Sets the DHCP client ID.
dhcp disable
Disables DHCP.
dhcp enable
Enables DHCP.
domain
<text>
Sets the domain name. <text> = name of the domain.
exit
Exits to the config level.
failover
Enter failover configuration level
hostname
<text>
Sets the host name. <text> = name of the host.
if
<instance>
Changes to the interface configuration level.
ip address
<ip address/cidr>
Sets the IP address and network mask. Formats accept-
ed: 192.168.1.1 (default mask) 192.168.1.1/24 (CIDR)
"192.168.1.1 255.255.255.0" (explicit mask)
link
Enter link configuration level
PremierWave® XC Intelligent Gateway Command Reference
204