5: Commands and Levels
clrscrn
Clears the screen.
default action
Restores the default value of action (ACCEPT).
exit
Exits to the config-gateway level.
mac address
<hexadecimal>
Sets the filter MAC Address. Each byte is represented by
two adjacent hex digits. Bytes may run together or be
separated by optional punctuation: 123ABC "12 3A BC"
12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must en-
close the value if it contains spaces.
mac address filter
<number>
Change to config mac filter level.
no mac address
Removes the filter MAC Address.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
write
Stores the current configuration in permanent memory.
mac address filter 8 (config-mac_filter:8) level commands
action accept
Sets the action to ACCEPT.
action drop
Sets the action to DROP.
clrscrn
Clears the screen.
default action
Restores the default value of action (ACCEPT).
exit
Exits to the config-gateway level.
mac address
<hexadecimal>
Sets the filter MAC Address. Each byte is represented by
two adjacent hex digits. Bytes may run together or be
separated by optional punctuation: 123ABC "12 3A BC"
12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must en-
close the value if it contains spaces.
mac address filter
<number>
Change to config mac filter level.
no mac address
Removes the filter MAC Address.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
write
Stores the current configuration in permanent memory.
modem (tunnel-modem:2) level commands
clrscrn
Clears the screen.
connect string
<text>
Sets the CONNECT string used in modem emulation.
<string> = connect string.
default incoming connection
Default disables incoming network connections.
default response type
Default uses text type responses.
display remote ip disable
The incoming RING has nothing following it.
display remote ip enable
The incoming RING is followed by the IP address of the
caller.
echo commands disable
Does not echo modem commands.
echo commands enable
Echoes modem commands.
echo pluses disable
Does not echo the +++ characters when entering modem
command mode.
echo pluses enable
Echoes the +++ characters when entering modem com-
mand mode.
error unknown commands disable
Returns OK on unknown AT commands.
PremierWave® XC Intelligent Gateway Command Reference
214