5: Commands and Levels
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
state disable
Does not send SNMP Trap.
state enable
Sends SNMP Trap when alarm condition is met.
write
Stores the current configuration in permanent memory.
snmp trap (config-action-snmp_trap:digital input 2 state change) level commands
alarm message
<text>
Sets the message to be sent when the alarm turns on.
clrscrn
Clears the screen.
exit
Exits to the next higher level.
no alarm message
Removes the alarm message.
no normal message
Removes the normal message.
no reminder interval
Clears the SNMP Trap reminder interval. SNMP Trap is
sent once only.
normal message
<text>
Sets the message to be sent when the alarm turns off.
reminder interval
<minutes>
Sets the SNMP Trap reminder interval.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
state disable
Does not send SNMP Trap.
state enable
Sends SNMP Trap when alarm condition is met.
write
Stores the current configuration in permanent memory.
snmp trap (config-action-snmp_trap:digital input 1 state change) level commands
alarm message
<text>
Sets the message to be sent when the alarm turns on.
clrscrn
Clears the screen.
exit
Exits to the next higher level.
no alarm message
Removes the alarm message.
no normal message
Removes the normal message.
no reminder interval
Clears the SNMP Trap reminder interval. SNMP Trap is
sent once only.
normal message
<text>
Sets the message to be sent when the alarm turns off.
reminder interval
<minutes>
Sets the SNMP Trap reminder interval.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
state disable
Does not send SNMP Trap.
state enable
Sends SNMP Trap when alarm condition is met.
write
Stores the current configuration in permanent memory.
snmpd (config-snmp-snmpd) level commands
authentication password
<text>
Sets password used for authentication for agent.
authentication protocol md5
Uses MD5 for authentication for agent.
authentication protocol sha
Uses SHA for authentication for agent.
clrscrn
Clears the screen.
default authentication protocol
Restores to default SNMPv3 authentication method: MD5
for agent.
PremierWave® XC Intelligent Gateway Command Reference
237