5: Commands and Levels
default privacy protocol
Restores to default SNMPv3 privacy encryption method:
DES for agent.
default read community
Restores the SNMP read-only community to default: pub-
lic
default security
Restores to default SNMPv3 security method: Authentica-
tion, No Privacy for agent.
default system description
Restores the SNMP system description to its default.
default system name
Restores the SNMP system name to default: the product
name.
default version
Restores to default SNMP version v2c for agent.
default write community
Clears the SNMP read/write community to default: private
exit
Exits to the next higher level.
no authentication password
Clears authentication password for agent.
no privacy password
Clears privacy password for agent.
no system contact
Clears the SNMP system contact.
no username
Clears SNMPv3 username for agent.
privacy password
<text>
Sets password used for privacy encryption for agent.
privacy protocol aes
Uses AES for privacy encryption for agent.
privacy protocol des
Uses DES for privacy encryption for agent.
read community
<text>
Sets the SNMP read-only community string. <text> =
name of the read-only community string to be set.
security authentication and privacy
Authentication and Privacy for agent.
security authentication but no privacy
Authentication, No Privacy for agent.
security no authentication and no priv
No Authentication, No Privacy for agent.
show
Shows the current configuration.
show engine id
Displays the SNMP agent engine ID.
show history
Displays the last 20 commands entered during the current
CLI session.
state disable
Disables the SNMP agent.
state enable
Enables the SNMP agent.
system contact
<text>
Sets the SNMP system contact information. <text> = sys-
tem contact information.
system description
<text>
Sets the SNMP system description. <text> = description of
device.
system name
<text>
Sets the SNMP system name. <text> = SNMP system
name.
username
<text>
Sets SNMPv3 username for agent.
version snmpv1
Uses SNMPv1 for agent.
version snmpv2c
Uses SNMPv2c for agent.
version snmpv3
Uses SNMPv3 for agent.
write
Stores the current configuration in permanent memory.
write community
<text>
Sets the SNMP read-write community string. <text> =
name of the read-write community string to be set.
ssh (ssh) level commands
client
Enters the SSH Client configuration level.
clrscrn
Clears the screen.
PremierWave® XC Intelligent Gateway Command Reference
238