6: Network Settings
PremierWave® XN Intelligent Gateway User Guide
64
Table 6-25 Adding a New Static Route
To Configure Gateway Static Route Settings
Using Web Manager
To modify gateway static route information, click
Gateway
on the menu and select
Configuration > Static Routes
.
Using the CLI
To enter the gateway command level:
enable -> config -> gateway -> static
route <
number
>
Using XML
Include in your file:
<configgroup name ="gateway"> <configitem name="static
routes" instance="<
number
>"
DHCP Server
Allows the user to configure the device as a DHCP server.
Table 6-26 DHCP Settings
Adding New Static Route
Settings
Description
Name
Enter the user friendly name for the route.
Network
Enter the Network or Host for the route.
Gateway
Enter the Gateway for the route.
Interface
Select the Interface for the route.
Metric
Enter the priority for the route. Lower metric means higher priority.
DHCP Settings
Description
Lease time
Enter the duration for which lease is initially assigned. Clients must renew after this
duration.
State
Enable or Disable the DHCP server for the DHCP settings.
Enabled
: DHCP server is enabled.
Disabled
: DHCP server is disabled.
Start IP Address
View or edit the Start IP Address of address pool.
End IP Address
View or edit the End IP Address of address pool.
State
Enable or Disable the DHCP server for the DHCPv6 settings.
Enabled
: DHCP server is enabled.
Disabled
: DHCP server is disabled.
Start IPv6 Address
Start IPv6 Address of address pool.
End IPv6 Address
End IPv6 Address of address pool.