11: Management Interface Settings
PremierWave® XN Intelligent Gateway User Guide
104
Telnet Settings
The Telnet settings control CLI access to the PremierWave XN intelligent gateway telnet over the
Telnet protocol.
Table 11-2 Telnet Settings
To Configure Telnet CLI Settings
Using Web Manager
To configure Telnet settings, click
CLI
in the menu and select
Configuration
.
Using the CLI
To enter the Telnet command level:
enable -> config -> cli -> Telnet
Using XML
Include in your file:
<configgroup name=”Telnet”>
and
<configitem name=”state”>
and
<configitem name=”authentication”>
SSH CLI Settings
The SSH settings control CLI access to the PremierWave XN device over the SSH protocol.
Table 11-3 SSH Settings
Telnet Settings
Description
Telnet State
Select to enable or disableCLI access via Telnet
Telnet Port
Enter an alternative Telnet Port to override the default used by the CLI server.
Blank the field to restore the default.
Telnet Max Sessions
Specify the maximum number of concurrent Telnet sessions that will be allowed.
Telnet Authentication
Select to enable or disable authentication for Telnet logins.
SSH Settings
Description
SSH State
Select to enable or disable CLI access via SSH.
SSH Port
Specify the SSH Port and override the default, as needed. Blank the field to
restore the default.
SSH Max Sessions
Specify the maximum number of concurrent SSH sessions that will be allowed.
