6: Network Settings
PremierWave® XN Intelligent Gateway User Guide
61
Gateway
The PremierWave XN intelligent gateway can be configured as a wireless router with DHCP
server functionality.
Status
This page displays the current configuration and statistics information for the gateway.
To view gateway status: click
Gateway
on the menu and select
Status
.
WAN
Table 6-20 WAN Configuration
Gateway Settings
Description
Operating Mode
Select the type of operating mode:
Disabled
: prevents the device to be used as a gateway; use the device
normally.
Gateway
: allows the device to be used as a router with NAT.
Router
: allows the device to be used as a router without NAT.
Firewall
Select to enable or disable firewall:
Enabled
: enables the device firewall.
Disabled
: disable the device firewall.
MAC Address filter
Select to enable or disable the MAC address filter.
Interface
Specify the WAN interface. Generally wlan0 interface.
IP Address
Assign a static IP address to the gateway.
IPv6 Address
Assign a static IPv6 address to the gateway.
Primary DNS
Enter the IP address of the primary Domain Name Server.
Note:
This setting will be used when either Static IP or Auto IP is active, or
if DHCP/BOOTP is active and no DNS server was acquired from the
server.
Secondary DNS
Enter the IP address of the secondary Domain Name Server.
Note:
This setting will be used when either Static IP or Auto IP is active, or
if DHCP/BOOTP is active and no DNS server was acquired from the
server.
