5: Commands and Levels
SGX™ 5150 IoT Device Gateway Command Reference
351
clrscrn
Clears the screen.
exit
Exits to the config-dhcpd level.
ip address
<IP address>
Sets the reserved IP address.
ipv6 address
<ipv6 ad-
dress/prefix>
Sets the reserved IPv6 address. IPv6 addresses are written in eight groups of four hexa-
decimal digits separated by colons, such as 2001:0db8:85a3:0000:0000:8a2e:0370:7334
Network address ranges are written in CIDR notation. A network is denoted by the first
address in the block (ending in all zeroes), a slash (/), and a decimal value equal to the
size in bits of the prefix
no ip address
Clears the reserved IP address.
no ipv6 address
Clears the reserved IPv6 address.
no mac address
Removes the MAC Address.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI session.
static leases
<number>
Change to dhcpd static lease level.
write
Stores the current configuration in permanent memory.
static leases 8 (config-dhcpd-static_leases:8) level commands
clrscrn
Clears the screen.
exit
Exits to the config-dhcpd level.
ip address
<IP address>
Sets the reserved IP address.
ipv6 address
<ipv6 ad-
dress/prefix>
Sets the reserved IPv6 address. IPv6 addresses are written in eight groups of four hexa-
decimal digits separated by colons, such as 2001:0db8:85a3:0000:0000:8a2e:0370:7334
Network address ranges are written in CIDR notation. A network is denoted by the first
address in the block (ending in all zeroes), a slash (/), and a decimal value equal to the
size in bits of the prefix
no ip address
Clears the reserved IP address.
no ipv6 address
Clears the reserved IPv6 address.
no mac address
Removes the MAC Address.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI session.
static leases
<number>
Change to dhcpd static lease level.
write
Stores the current configuration in permanent memory.
static route 1 (config-staticroute:1) level commands
clrscrn
Clears the screen.
default metric
Restores the metric to default value.
exit
Exits to the config-gateway level.
friendly name
<text>
Set the friendly name for static route. <text> = friendly name
gateway
<text>
Sets the gateway for static route network.
interface
<text>
Sets the route interface <text> = interface name
metric
<number>
Sets the metric for static route. <number> = metric
network
<text>
Sets the IP address and network mask for static route network.
no friendly name
Remove the friendly name
no gateway
Clears the gateway for static route network.
no interface
Clears the route interface. The WAN interface is used if no interface is specified.
no network
Clears the IP address for static route network.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI session.
state disable
Disables the static route.
