Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
178
of
272
8 Enabled Disable Low 60.0
GigabitEthernet 1/9 does not have PoE support
GigabitEthernet 1/10 does not have PoE support
SISPM1040-582-LRT#
show poe status
Interface PD Class Port Status Pwr
Req Pwr Alloc Power Current Priority
Used
[W] Used[W] Used[W] Used[mA]
----------------------- --------- ----------------------------------------- ----
--- --------- ------- -------- --------
GigabitEthernet 1/1 - No PD detected 0
0 0.0 0 High
GigabitEthernet 1/2 - No PD detected 0
0 0.0 0 Critical
GigabitEthernet 1/3 - No PD detected 0
0 0.0 0 High
GigabitEthernet 1/4 1 PoE turned ON 60
60 1.6 35 Low
GigabitEthernet 1/5 - No PD detected 0
0 0.0 0 Low
GigabitEthernet 1/6 - No PD detected 0
0 0.0 0 Low
GigabitEthernet 1/7 1 PoE turned ON 60
60 1.6 36 Low
GigabitEthernet 1/8 - No PD detected 0
0 0.0 0 Low
Total Power Request : 120.0 [W]
Total Power Alloctaed : 120.0 [W]
Total Power Used : 3.2 [W]
Total Current Used : 71 [mA]
Capacitor Detection : No
Example 2
: At default PoE config; added at FW v7.10.2294.
SISPM1040-582-LRT#
show poe config
Primary Power Supply [W] : 480
Port Mode Schedule Priority Max. Power [W]
---- -------- ------------------------------- -------- --------------
1 POH Disable Low 60.0
2 POH Disable Low 60.0
3 POH Disable Low 60.0
4 POH Disable Low 60.0
5 POH Disable Low 60.0
6 POH Disable Low 60.0
7 POH Disable Low 60.0
8 POH Disable Low 60.0
GigabitEthernet 1/9 does not have PoE support
GigabitEthernet 1/10 does not have PoE support
SISPM1040-582-LRT#
show poe config
Primary Power Supply [W] : 480
Port Mode Schedule Priority LLDP Legacy
---- --------- ------------------------------- -------- -------- --------
1 Disabled Profile 1 High Enabled Disabled
2 8023bt90w Profile 1 Critical Enabled Disabled
3 4pair90w Profile 1 High Enabled Disabled
4 8023bt30w Profile 1 Low Enabled Disabled
5 4pair60w Disable Low Enabled Disabled