Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
180
of
272
Example 4
: With default PoE config at FW v7.20.0039:
SISPM1040-582-LRT#
show poe config
Primary Power Supply [W] : 480
Port Mode Schedule Priority LLDP Legacy
---- -------- ------------------------------- -------- -------- --------
1 8023bt Disable Low Enabled Disabled
2 8023bt Disable Low Enabled Disabled
3 8023bt Disable Low Enabled Disabled
4 8023bt Disable Low Enabled Disabled
5 8023bt Disable Low Enabled Disabled
6 8023bt Disable Low Enabled Disabled
7 8023bt Disable Low Enabled Disabled
8 8023bt Disable Low Enabled Disabled
GigabitEthernet 1/9 does not have PoE support
GigabitEthernet 1/10 does not have PoE support
SISPM1040-582-LRT#
Example 5
: With typical PoE config at FW v7.20.0039:
SISPM1040-582-LRT#
show poe config
Primary Power Supply [W] : 480
Port Mode Schedule Priority LLDP Legacy
---- -------- ------------------------------- -------- -------- --------
1 8023bt Disable Critical Enabled Disabled
2 8023bt Profile 1 High Enabled Disabled
3 4pair90w Profile 1 Low Enabled Disabled
4 4pair60w Profile 2 Low Enabled Disabled
5 8023bt Disable Low Enabled Disabled
6 8023bt Disable Low Enabled Enabled
7 8023bt Disable Low Enabled Enabled
8 8023bt Disable Low Enabled Disabled
GigabitEthernet 1/9 does not have PoE support
GigabitEthernet 1/10 does not have PoE support
SISPM1040-582-LRT#
Messages
:
W poe 00:59:23 50/poe_send_ping_check#2405: Warning: The ping ip adress has no same ip domain.