Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
199
of
272
Command
:
terminal
Description
:
Display terminal configuration parameters.
Syntax
:
show
terminal <cr>
Parameters
: None.
Example
:
SISPM1040-582-LRT#
show terminal
Line is vty 0.
* You are at this line now.
Alive from Telnet.
Default privileged level is 2.
Command line editing is enabled
Display EXEC banner is enabled.
Display Day banner is enabled.
Terminal width is 80.
length is 24.
history size is 32.
exec-timeout is 10 min 0 second.
Current session privilege is 15.
Elapsed time is 0 day 1 hour 10 min 4 sec.
Idle time is 0 day 0 hour 0 min 0 sec.
SISPM1040-582-LRT#
Command
:
udld
Description
:
Show Unidirectional Link Detection(UDLD) configurations, statistics and status.
Syntax
:
show
udld [ interface ( <port_type> [ <plist> ] ) ]
Parameters
: interface
Choose port
* All switches or All ports
GigabitEthernet 1 Gigabit Ethernet Port
<port_type_list> Port list in 1/1-10
<port_type_list> Port list for all port types
Example
:
SISPM1040-582-LRT#
show udld
GigabitEthernet 1/1
----------------------------------------------------------------------
UDLD Mode : Normal
Admin State : Enable
Message Time Interval(Sec): 21
Device ID(local) : 00-C0-F2-49-39-30
Device Name(local) : SISPM1040-582-LRT
Bidirectional state : Indeterminant
No neighbor cache information stored
---------------------
GigabitEthernet 1/2
----------------------------------------------------------------------
UDLD Mode : Aggressive
Admin State : Enable
Message Time Interval(Sec): 7
-- more --, next page: Space, continue: g, quit: ^C
