Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
226
of
272
Command
:
poe
Description
:
Configure Power Over Ethernet for an interface.
Syntax
:
poe
delay-mode
poe
delay-time <v_0_to_300>
poe
failure-action { nothing | reboot-Remote-PD }
poe
hour <v_hour>
poe
interval-time <interval>
poe
legacy
poe
lldp
poe
max-reboot-times <reboot>
poe
mode { enable | disable | force | 2-pair | 4-pair }
(before FW VB7.10.2658)
poe
mode { 4pair60w | 4pair90w }
(FW VB7.10.2658 and above)
poe
mode { disable | 8023bt }
(FW VB7.10.2658 and above)
poe
mode { 4pair60w | 4pair90w }
poe
mode { disable | 8023bt90w | 8023bt60w | 8023bt30w | force90w | force60w }
poe
ping-ip-addr <address>
poe
ping-ip-addr { <address> | <ipv6> }
poe
ping-retry-time <retry>
poe
port-profile name <entry_name>
poe
power limit { <v_word9> }
(before FW VB7.10.2658)
poe
priority { low | high | critical }
poe
reboot-time <reboot>
poe
schedule-all
poe
schedule-mode
poe
startup-time <startuptime>
poe
weekday { Sun | Mon | Tue | Wed | Thr | Fri | Sat } hour [ <hour_v_0_to_23>]
Parameters
: delay-mode
Configure PoE Power delay mode
delay-time
Setting power delay time from 0 to 300(sec).
failure-action
Configure PoE Auto Power Reset Failure Action.
hour
Configure PoE Power scheduling per hour.
interval-time
Configure PoE Auto Power Reset Interval Time.
legacy Enable poe legacy functionality (FW VB7.10.2658 and above)
lldp Enable poe lldp functionality (FW VB7.10.2658 and above)
max-reboot-times Configure PoE Auto Power Reset Max Reboot Times.
mode
PoE mode.
2-pair
Set mode to PoE 2-pair (Maximum power 30.0 W) (before VB7.10.2658)
4-pair
Set mode to PoE 4-pair (Maximum power 60.0 W) (before VB7.10.2658)
4pair60w
Set mode to 4-pair 60w (FW VB7.10.2658 and above)
4pair90w
Set mode to 4-pair 90w (FW VB7.10.2658 and above)
8023bt
Set mode to 802.3bt (FW VB7.10.2658 and above)
disable
Set mode to Disable (FW VB7.10.2658 and above)
4pair60w
Set mode to 4-pair 60w
4pair90w
Set mode to 4-pair 90w
8023bt30w
Set mode to 802.3bt 30w
8023bt60w
Set mode to 802.3bt 60w
8023bt90w
Set mode to 802.3bt 90w
disable
Set mode to Disable
