Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
24
of
272
4 Configure Mode Commands
Enter the
configure terminal
command to got fro Exec mode to Config mode.
Command
Function
aaa
Authentication, Authorization and Accounting
access Access management
access-list Access list
aggregation Aggregation mode
always-on-poe Enable Always-on PoE
banner
Define a login banner
clock
Configure time-of-day clock
command-history-log Enable to Save Command Histry to Flash
debug
Debugging functions
default
Set a command to its defaults
dms
Enable DMS Master
do
To run exec commands in config mode
dot1x
IEEE Standard for port-based Network Access Control
enable
Modify enable password parameters
end
Go back to EXEC mode
eps
Ethernet Protection Switching.
erps
Ethernet Ring Protection Switching
evc
Ethernet Virtual Connections
event
Trap event severity level
exec-timeout
Autologout timeout
exit
Exit from current mode
green-ethernet
Green ethernet (Power reduction)
gvrp
Enable GVRP feature
help
Description of the interactive help system
hostname
Set system's network name
interface Select an interface to configure
ip
Internet Protocol
ipmc
IPv4/IPv6 multicast configuration
ipv6
IPv6 configuration commands
lacp
LACP settings
line
Configure a terminal line
lldp LLDP configurations.
logging System logging message
loop-protect Loop protection configuration
mac MAC table entries/configuration
map-api-key Set google map key string
mep
Maintenance Entity Point
monitor Monitoring different system events
mrp
MRP Configuration
mvr Multicast VLAN Registration configuration
no Negate a command or set its defaults
ntp Configure NTP
percepxion
Percepxion configuration