Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
247
of
272
27.4 MRP Sample Setup
The example below shows SISPM1040-582-LRT switches (one MRM and five MRCs).
Figure: MRP Sample Setup
27.5 MRP Pre-Requisites (General)
The following are required to perform MRP setups.
1.
Spanning Tree must be disabled at Configuration > Spanning Tree > CIST Port.
2.
Other Ring technologies must be disabled (G.8031 EPS, G.8032 ERPS, Rapid-Ring, Ring-To-Ring, etc.).
3.
A single MRM (Manager) is supported per ring.
4.
Other pre-requisites may apply to the specific examples below.