Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
248
of
272
27.6 MRP Config Mode Command Parameters
<1-2>
DomainID of Domain to modify
domain
Create/Delete MRP Domain
client Operate on an MRP Client
diag-clear Clear Diagnostic stats for MRP Domain
manager Operate on an MRP Manager
name Set name for Domain
ringport Set/Add Ringport
ringport-delete
Delete Ringport
role Set role in Domain to manager or client
status Enable/Disable a domain
uuid Set UUID for Domain
vlan Set VLAN for Domain
delete
Delete an MRP Domain
new
Create a new MRP Domain
<1-2>
Domain ID of new Domain
<1-2>
Domain ID of Domain to be deleted
27.7 MRP Config Mode Command Syntax
mrp
<domainId> client blocked-state { enable | disable }
mrp
<domainId> client link-interval <downInterval> <upInterval> [ <linkChangeCount> ]
mrp
<domainId> diag-clear
mrp
<domainId> manager link-change-react { enable | disable }
mrp
<domainId> manager media-redundancy { enable | disable }
mrp
<domainId> manager nonblocking-supported { enable | disable }
mrp
<domainId> manager priority <priority>
mrp
<domainId> manager test-interval <testInterval> [ <shortTestInterval> ]
mrp
<domainId> manager test-monitoring <count> [ <extendedCount> ]
mrp
<domainId> manager topology-change <topoChangeInterval> [ <topoChangeRepeatCount> ]
mrp
<domainId> name <domainName>
mrp
<domainId> ringport { primary | secondary } <port_type> <mrp_port>
mrp
<domainId> ringport-delete { primary | secondary }
mrp
<domainId> role { manager | client }
mrp
<domainId> status { enable | disable }
mrp
<domainId> uuid <domainUUID>
mrp
<domainId> vlan <vlanId>
mrp
domain delete <domainId>
mrp
domain new <domainId>
