Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
41
of
272
Command
:
event
Description
:
Set Trap event severity level.
Syntax
:
event
group
{ AC-Power | ACL | ACL-Log | Access-Mgmt | Auth-Failed | AUTO-SAVING | Cold-Start | Config-Info
| DI-1-Normal | Digital-Out | Firmware-Upgrade | Import-Export | LACP | Link-Status | Login | Logout | Mgmt-IP-
Change | Module-Change | NAS | Password-Change | PoE-PD-On | Port-Security | PWR-1-Off-On | PWR-2-Off
-On | Spanning-Tree | Warm-Start | DC-Power | Battery-Power | BCS-Protection | DMS | Advanced | Dying-Gasp
| PoE-Auto-Check | Poe-Auto-Power-Reset | FAN | ZTU-FAIL | Surveillance | SCP-Success | SCP-Fail } { level <lvl>
| syslog { enable | disable } | trap { enable | disable } | smtp { enable | disable } | ipush { enable | disable } }
event
group
{ PWR-1-On-Off | PWR-2-On-Off | DI-1-Abnormal | Loop-Protect | Temperature | Voltage | Rapid-
Ring-Break | Rapid-Chain-Break | Rapid-Ring-Error | PoE-PD-Off | Over-Max-PoE-Power-Limitation | PoE-PD-
Over-Current | OTP | MRP-Event} { level <lvl> | syslog { enable | disable } | trap { enable | disable } | smtp
{ enable | disable } | ipush { enable | disable } | digital-out { enable | disable } }
Parameters
:
group
Configure trap event severity level
ACL
Group ID ACL
ACL-Log Group ID ACL Log
Access-Mgmt Group ID Access Management
Auth-Failed Group ID Auth Fail
Cold-Start Group ID Cold Start
Config-Info Group ID Config Info
DI-1-Abnormal Group ID DI 1 Abnormal
DI-1-Normal Group ID DI 1 Normal
DMS Group ID DMS
Digital-Out Group ID Digital Out
Firmware-Upgrade Group ID Firmware Upgrade
Import-Export
Group ID Import Export
LACP Group ID LACP
Login
Group ID Login
Logout
Group ID Logout
Loop-Protect Group ID Loop Protect
MRP-Event
Group ID MRP Event
Mgmt-IP-Change Group ID Management IP Change
Module-Change
Group ID Module Change
NAS Group ID NAS
Over-Max-PoE-Power-Limitation Group ID Over Max PoE Power Limitation
PWR-1-Off-On Group ID PWR 1 Off => On
PWR-1-On-Off Group ID PWR 1 On => Off
PWR-2-Off-On Group ID PWR 2 Off => On
PWR-2-On-Off Group ID PWR 2 On => Off
Password-Change Group ID Password Change
PoE-PD-Off Group ID PoE PD Off
PoE-PD-On Group ID PoE PD On
PoE-PD-Over-Current Group ID PoE PD Over Current
Poe-Auto-Power-Reset Group ID PoE Auto Power Reset
Port-Security Group ID Port Security
Rapid-Chain-Break Group ID Rapid Chain Break
Rapid-Ring-Break Group ID Rapid Ring Break
