Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
72
of
272
Command
:
no
Negate a command or set its defaults. Table : no Commands (
Config
mode).
Command
Function
aaa Authentication, Authorization and Accounting
access Access management
access-list Access list
aggregation
Aggregation mode
always-on-poe
Disable Always On PoE
banner Define a login banner
clock Configure time-of-day clock
command-history-log Disable to Save Command Histry to Flash
debug Debugging functions
dot1x IEEE Standard for port-based Network Access Control
enable Modify enable password parameters
eps Ethernet Protection Switching.
erps Ethernet Ring Protection Switching
evc Ethernet Virtual Connections
exec-timeout
No Auto-logout timeout
green-ethernet Green ethernet (Power reduction)
gvrp Enable GVRP feature
hostname Set system's network name
interface Select an interface to configure
ip Internet Protocol
ipmc IPv4/IPv6 multicast configuration
ipv6 IPv6 configuration commands
lacp LACP settings
lldp LLDP configurations.
logging System logging message
loop-protect Loop protection configuration
mac MAC table entries/configuration
map-api-key
Google Map API key
mep Maintenance Entity Point
monitor Monitoring different system events
mvr Multicast VLAN Registration configuration
ntp Configure NTP
poe Power Over Ethernet.
port-security Enable/disable port security globally.
privilege Command privilege parameters
ptp Precision time Protocol (1588)
qos Quality of Service
radius-server Configure RADIUS
rmon Remote Monitoring
sflow Statistics flow.
snmp-server Enable SNMP server
spanning-tree STP Bridge
switchport VLAN
system Set the system description
tacacs-server Configure
udld Disable UDLD configurations on all fiber-optic ports.
upnp Set UPnP configuration
username Establish User Name Authentication
vlan VLAN commands
