Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
112
of
272
8 Disable Commands
Command
:
disable
Description
:
Turn off privileged commands.
Syntax
:
disable
[ <new_priv> ]
Parameters
:
<0-15>
<cr>
Example
:
SISPM1040-582-LRT#
disable 1
SISPM1040-582-LRT>
9 Do Commands
Command
:
do
Description
:
To run Exec mode commands in Config mode or Interface Config mode.
Syntax
:
do
<command>
Parameters
: <line> Exec Command
Example 1
: In Config mode:
SISPM1040-582-LRT(config)#
do show clock
System Time : 2011-01-01T00:01:33+00:00
SISPM1040-582-LRT(config)#
do show vlan
VLAN Name Interfaces
---- -------------------------------- ----------
1 default Gi 1/1-10
SISPM1040-582-LRT(config)#
Example 2
: In Interface Config mode:
SISPM1040-582-LRT(config-if-vlan)#
do dir
Directory of flash:
r- 2010-12-31 23:59:59 716 default-config
rw 2011-01-01 00:02:53 1189 startup-config
2 files, 1905 bytes total.
SISPM1040-582-LRT(config-if-vlan)#
SISPM1040-582-LRT(config-if)#
do show logging 3
Switch : 1
ID : 3
Level : Warning
Time : 2011-01-01T00:00:11+00:00
Message:
Link up on port 10
SISPM1040-582-LRT(config-if)#
Messages
:
% No such interface type: brief
% Fail to execute command in EXEC mode.
