Lantronix
SM12XPA Web User Guide
33848 Rev. A
Page
153
of
473
Group Information
This page displays IGMP Snooping Group Information. Entries in the IGMP Group Table are shown on this page.
The IGMP Group Table is sorted first by VLAN ID, and then by group. This will use the last entry of the currently
displayed table as a basis for the next lookup. When the end is reached the text "No more entries" is shown in
the displayed table.
Each page shows up to 99 entries from the IGMP Group table, selected through the "entries per page" input
field. When first visited, the web page will show the first 20 entries from the beginning of the IGMP Group Table.
The "Start from VLAN", and "group" input fields allow the user to select the starting point in the IGMP Group
Table. Clicking the Refresh button will update the displayed table starting from that or the closest next IGMP
Group Table match. In addition, the two input fields will - upon a Refresh button click - assume the value of the
first displayed entry, allowing for continuous refresh with the same start address.
Web Interface
To display the IGMP Snooping Group Information in the web UI:
1.
Click Multicast, IGMP Snooping and Group Information.
2.
Specify how many entries to show in one page.
3.
To automatically refresh the information, click “Auto-refresh”.
4.
Click “Refresh” to refresh an entry.
5.
Click First Page/Next Page to change pages.
Figure 9-1.4: The IGMP Snooping Groups Information
Parameter descriptions
:
VLAN ID
: VLAN ID of the group.
Groups
: Group address of the group displayed.
Port Members
: Ports under this group.
Buttons
Auto-refresh
: Check this box to refresh the page automatically every 3 seconds.
Refresh
: Click to refresh the page immediately.
First Page
: Updates the table, starting with the first entry in the IGMP Group Table.
Next Page
: Updates the table, starting with the entry after the last entry currently displayed.