Lantronix
SM12XPA Web User Guide
33848 Rev. A
Page
166
of
473
Groups Information
This page displays MVR Groups detail information on the switch. Entries in the MVR Group Table are shown on
this page. The MVR Group Table is sorted first by VLAN ID, and then by group.
Web Interface
To display MVR Groups Information in the web UI:
1.
Click Multicast, MVR, and Groups Information.
2.
Select ‘Start from VLAN’, ‘’ Group Address’, and ’entries per page’ parameters.
3.
To automatically refresh the information click “Auto-refresh”.
4.
Click “Refresh” to refresh an entry of the MVR Groups Information.
5.
Click First/Next Page to change pages.
Figure 9-3.3: MVR Groups Information
Parameter descriptions
:
VLAN ID
: VLAN ID of the group.
Groups
: Group ID of the group displayed.
Port Members
: Ports under this group.
Buttons
Auto-refresh
: Check this box to refresh the page automatically every 3 seconds.
Refresh
: Click to refresh the page immediately.
First Page
: Updates the table starting from the first entry in the MVR Channels (Groups) Information
Table.
Next Page
: Updates the table, starting with the entry after the last entry currently displayed.