Lantronix
SM12XPA Web User Guide
33848 Rev. A
Page
171
of
473
Filtering Address Entry
This page provides address range settings used in an IPMC profile. The address entry is used to specify the
address range that will be associated with IPMC Profile. You can create a maximum of 128 address entries in the
system.
Web Interface
To configure IPMC Profile Address parameters in the web UI:
1.
Click Multicast, Multicast Filtering Profile, and Filtering Address Entry.
2.
Click “Add New Address (Range) Entry”.
3.
Specify Entry Name, Start Address, and End Address.
4.
Click Apply to save the settings.
5.
To cancel the settings, click the Reset button. It will revert to previously saved values.
6.
Click “Refresh” to refresh an entry.
7.
Click First Entry/Next Entry to change Entry.
Figure 9-4.2: IPMC Profile Address Configuration
Parameter descriptions
:
Entry Name
: The name used for indexing the address entry table. Each entry has the unique name which is
composed of at maximum 16 alphabetic and numeric characters.
Start Address
: The starting IPv4/IPv6 Multicast Group Address that will be used as an address range.
End Address
: The ending IPv4/IPv6 Multicast Group Address that will be used as an address range.
