Lantronix
SM12XPA Web User Guide
33848 Rev. A
Page
186
of
473
Privilege Levels
This page provides an overview of the privilege levels. The switch provides user privilege level settings for these
groups: Aggregation, Debug, DHCP, DHCPv6_Client, Diagnostics, DMS_client, DMS_Trouble_shooting,
DMS_vBatch, EPS, ERPS, ETH_LINK_OAM, Firmware, FRR, Green_Ethernet, Install_Wizard, IP, IPMC_Snooping,
LACP, LLDP, Loop_Protect, MAC_Table, MEP, Miscellaneous, MRP, MVR, NTP, PoE, Ports, Private_VLANs, PTP,
QoS, RMirror, Security_Access, Security_network, SFlow, SMTP, Spanning Tree, System, Trap_Event, UDLD,
uFDMA_AIL, uFDMA_CIL, uPMP, VCL, VLAN_Translation, VLANs, Voice_VLAN, Watchdog, XXRP.
Each group can have a Privilege Level setting of 1 to 15.
To configure Privilege Levels in the web UI:
1.
Click Security, Management, and Privilege Levels.
2.
Specify the Privilege parameters (Read only and Read-write) for the one or more Group Name(s).
3.
Click Apply.
