Lantronix
SM12XPA Web User Guide
33848 Rev. A
Page
189
of
473
Methods that involve remote servers are timed out if the remote servers are offline. In this case the next
method is tried. Each method is tried from left to right and continues until a method either approves or rejects a
user. If a remote server is used for primary authentication it is recommended to configure secondary
authentication as 'local'. This lets the management client login via the local user database if none of the
configured authentication servers are alive.
Service Port
: The TCP port number for each client service. Valid port numbers are 1 ~ 65534.
HTTP
Redirect
: Enable http Automatic Redirect.
Command Authorization Method Configuration
Client
: The management client for which the configuration below applies.
Method
: Authorization Method can be set to one of these values:
none
: authorization is disabled, and login is not possible.
tacacs
: use a remote server for authorization.
Cmd Lvl
: Runs authorization for all commands at the specified privilege level. Specific command level that
should be authorized. Valid entries are 0 - 15.
Cfg Cmd
: Also authorize configuration commands.
Accounting Method Configuration
: The accounting section allows you to configure command and exec (login)
accounting. The table has one row for each client type and several columns:
Client
: The management client for which the configuration below applies.
Method
: Method can be set to one of these values:
no
: Accounting is disabled.
tacacs
: Use remote server(s) for accounting.
Cmd Lvl
: Enable accounting of all commands with a privilege level higher than or equal to this level. Valid values
are in the range 0 to 15. Leave the field empty to disable command accounting.
Exec
: Enable exec (login) accounting.
Buttons
Apply
: Click to save changes.
Reset
: Click to undo any changes made locally and revert to previously saved values.
