Lantronix
SM12XPA Web User Guide
33848 Rev. A
Page
231
of
473
VLAN Parameters
802.1Q Tagged
: Specify whether frames can hit the action according to the 802.1Q tagged. Valid values are:
Any
: Any value is allowed ("don't-care"). The default value is "Any".
Enabled
: Tagged frame only.
Disabled
: Untagged frame only.
VLAN ID Filter
: Specify the VLAN ID filter for this ACE.
Any
:
No VLAN ID filter is specified. (VLAN ID filter status is "don't-care".)
Specific
: If you want to filter a specific VLAN ID with this ACE, choose this value. A field for entering a
VLAN ID number appears.
VLAN ID
: When "Specific" is selected for the VLAN ID filter, you can enter a specific VLAN ID number. The valid
range is 1 to 4095. A frame that hits this ACE matches this VLAN ID value.
Tag Priority
: Specify the tag priority for this ACE. A frame that hits this ACE matches this tag priority. The
allowed number range is 0 to 7 or range 0-1, 2-3, 4-5, 6-7, 0-3 and 4-7. The value ‘Any’ means that no tag priority
is specified (tag priority is "don't-care".)
ARP Parameters
: The ARP parameters can be configured when Frame Type "ARP" is selected.
ARP/RARP
: Specify the available ARP/RARP opcode (OP) flag for this ACE:
Any
: No ARP/RARP OP flag is specified. (OP is "don't-care".)
ARP
: Frame must have ARP opcode set to ARP.
RARP
: Frame must have RARP opcode set to RARP.
Other
: Frame has unknown ARP/RARP Opcode flag.
Request/Reply
: Specify the available Request/Reply opcode (OP) flag for this ACE.
Any
: No Request/Reply OP flag is specified. (OP is "don't-care".)
Request
: Frame must have ARP Request or RARP Request OP flag set.
Reply
: Frame must have ARP Reply or RARP Reply OP flag.
Sender IP Filter
: Specify the sender IP filter for this ACE.
Any
: No sender IP filter is specified. (Sender IP filter is "don't-care".)
Host
: Sender IP filter is set to Host. Specify the sender IP address in the SIP Address field that appears.
Network
: Sender IP filter is set to Network. Specify the sender IP address and sender IP mask in the SIP
Address and SIP Mask fields that appear.
Sender IP Address
: When "Host" or "Network" is selected for the sender IP filter, you can enter a specific
sender IP address in dotted decimal notation.
Sender IP Mask
: When "Network" is selected for the sender IP filter, you can enter a specific sender IP mask in
dotted decimal notation.