Lantronix
SM12XPA Web User Guide
33848 Rev. A
Page
236
of
473
TCP FIN
: Specify the TCP "No more data from sender" (FIN) value for this ACE.
0
: TCP frames where the FIN field is set must not be able to match this entry.
1
: TCP frames where the FIN field is set must be able to match this entry.
Any
: Any value is allowed ("don't-care").
TCP SYN
: Specify the TCP "Synchronize sequence numbers" (SYN) value for this ACE.
0
: TCP frames where the SYN field is set must not be able to match this entry.
1
: TCP frames where the SYN field is set must be able to match this entry.
Any
: Any value is allowed ("don't-care").
TCP RST
: Specify the TCP "Reset the connection" (RST) value for this ACE.
0
: TCP frames where the RST field is set must not be able to match this entry.
1
: TCP frames where the RST field is set must be able to match this entry.
Any
: Any value is allowed ("don't-care").
TCP PSH
: Specify the TCP "Push Function" (PSH) value for this ACE.
0
: TCP frames where the PSH field is set must not be able to match this entry.
1
: TCP frames where the PSH field is set must be able to match this entry.
Any
: Any value is allowed ("don't-care").
TCP ACK
: Specify the TCP "Acknowledgment field significant" (ACK) value for this ACE.
0
: TCP frames where the ACK field is set must not be able to match this entry.
1
: TCP frames where the ACK field is set must be able to match this entry.
Any
: Any value is allowed ("don't-care").
TCP URG
: Specify the TCP "Urgent Pointer field significant" (URG) value for this ACE.
0
: TCP frames where the URG field is set must not be able to match this entry.
1
: TCP frames where the URG field is set must be able to match this entry.
Any
: Any value is allowed ("don't-care").
Ethernet Type Parameters
: The Ethernet Type parameters can be configured when Frame Type "Ethernet Type"
is selected.
EtherType Filter
: Specify the Ethernet type filter for this ACE.
Any
: No EtherType filter is specified (EtherType filter status is "don't-care").
Specific
: If you want to filter a specific EtherType filter with this ACE, you can enter a specific EtherType
value. A field for entering a EtherType value appears.
Ethernet Type Value
: When "Specific" is selected for the EtherType filter, you can enter a specific EtherType
value. The valid range is 0x600 to 0xFFFF but excluding 0x800(IPv4), 0x806(ARP) and 0x86DD(IPv6). A frame that
hits this ACE matches this EtherType value.
Buttons
Apply
: Click to save changes.
Reset
: Click to undo any changes made locally and revert to previously saved values.
Auto-refresh
: Click to automatically refresh page information every 3 seconds.