Lantronix
SM12XPA Web User Guide
33848 Rev. A
Page
259
of
473
Event
Configuration
Configure RMON Event parameters on this page. The entry index key is ID. To configure RMON Event
parameters in the web UI:
1.
Click SNMP, Event and Configuration.
2.
Click Add New Entry.
3.
Specify the ID parameters.
4.
Click Apply.
Figure 13-6.1: RMON Event Configuration
Parameter descriptions
:
ID
: Enter the index of the entry. The range is 1 to 65535.
Desc
: Enter this event, the string length is 0 to 127, default is a null string.
Type
: Enter the notification of the event; the possible types are:
None
: No SNMP log is created, and no SNMP trap is sent.
Log
: Create an SNMP log entry when the event is triggered.
Snmp trap
: Send an SNMP trap when the event is triggered.
Log and trap
: Create an SNMP log entry and send an SNMP trap when the event is triggered.
Event Last Time
: Shows the value of
sysUpTime
at the time this event entry last generated an event.
Buttons
Delete
: Check to delete the entry. It will be deleted during the next save.
Add New Entry
: Click to add a new entry to the table.
Apply
: Click to save changes.
Reset
: Click to undo any changes made locally and revert to previously saved values.