Lantronix
SM12XPA Web User Guide
33848 Rev. A
Page
26
of
473
Time Zone Configuration
Time Zone
: Lists various Time Zones worldwide. Select appropriate Time Zone from the drop down and click
Apply to set. The default is None.
Acronym
: Set the acronym of the time zone. This is a user-configurable acronym to identify the time zone.
(Range: Up to 16 characters.)
Daylight Saving Time Configuration
Daylight Saving Time
: This is used to set the clock forward or backward according to the configurations set
below for a defined Daylight Saving Time duration.
Select '
Disable
' to disable the Daylight Saving Time configuration. The default is Disabled.
Select '
Recurring
' and configure the Daylight Saving Time duration to repeat the configuration every
year.
Select '
Non-Recurring'
and configure the Daylight Saving Time duration for a one-time configuration.
Start time settings
: Week - Select the starting day, date, and time.
Day
- Select the starting day.
Month
- Select the starting month.
Hours
- Select the starting hour.
Minutes
- Select the starting minute.
End time settings
: Week - Select the ending day, date, and time.
Day
- Select the ending day.
Month
- Select the ending month.
Hours
- Select the ending hour.
Minutes
- Select the starting minute.
Offset settings
: Offset - Enter the number of minutes to add during Daylight Saving Time (1 to 1440).
Note
: The “Start Time Settings” and “End Time Settings” display what you set on the “Start Time Settings” and
“End Time Settings” field information.
Buttons
Apply
: Click to save changes.
Reset
: Click to undo any changes made locally and revert to previously saved values.
