Lantronix
SM12XPA Web User Guide
33848 Rev. A
Page
271
of
473
Defects
: A MEP can detect and report several defects, and multiple defects can be present at the same time.
This is indicated the following letter code.
Code Defect
Description
-
Defect
not present Defect not present.
R
someRDIdefect
RDI received from at least one remote MEP.
M
someMACstatusDefect Received Port Status TLV != psUp or Interface Status TLV != isUp.
C
someRMEPCCMdefect Valid CCM is not received within 3.5 times CCM interval from at least one
remote MEP.
E
errorCCMdefect
Received CCM from an unknown remote MEP-ID or CCM interval mismatch.
X
xconCCMdefect
Received CCM with an MD/MEG level smaller than configured or wrong.
MAID/MEGID (cross-connect).
CCM Rx
: CCM PDUs received by this MEP.
Valid
: Total number of CCMs that hit this MEP and passed the validation test.
Invalid
: Total number of CCMs that hit this MEP and didn't pass the validation test.
Errors
: Total number of out-of-sequence errors seen from RMEPs.
CCM Tx
: Total number of CCM PDUs transmitted by this MEP.
Buttons
Auto-refresh
: Check this box to automatically refresh the page every 3 seconds.
Refresh
: Click to manually update webpage values immediately.
