Lantronix
SM12XPA Web User Guide
33848 Rev. A
Page
340
of
473
Routing Status
This page displays the OSPF Routing Status table.
Each page shows up to 999 table entries, selected through the "entries per page" input field. When first visited,
the web page will show the beginning entries of this table.
The "Start from ID" input field allow the user to change the starting point in this table. Clicking the
>>
button will
update the displayed table starting from that or the closest next entry match. In addition, these input fields will
upon a
|<<
button click - assume the value of the first displayed entry, allowing for continuous refresh with the
same start input field.
Figure 20-2.5: OSPF Routing Status
Entry fields
:
Start from Route Type
: At the dropdown select Intra Area, Inter Area, Border Router, External Type-1, or
External Type-2. The default is Intra Area.
Destination
: Enter the destination IP address. The default is 0.0.0.0/0.
Area
: Enter the area IP address The default is 0.0.0.0.
NextHop
: Enter the IP address of the next hop. The default is 0.0.0.0.
Codes
: i – Intra-area Router Path, I – Inter-area Router Path.
Table parameters
:
Route Type
: The OSPF route type:
Intra Area
: The destination is an OSPF route which is located on intra-area.
Inter Area
: The destination is an OSPF route which is located on inter-area.
Border Router
: The destination is a border router.
External Type-1
: The destination is an external Type-1 route.
External Type-2
: The destination is an external Type-2 route.
Destination
: Network and prefix (e.g., 10.0.0.0/16) of the given route entry.
Area
: Indicates which area the route or router can be reached via/to.
NextHop
: Ipv4 address encoded as "a.b.c.d", where a-d is a base-10 human readable integer in the range [0-
255]
