Lantronix
SM12XPA Web User Guide
33848 Rev. A
Page
362
of
473
Interfaces
This page displays the interface configuration parameter table.
Figure 21-1.5: OSPF6 Interface Configuration
Parameter descriptions
:
Interface
: Interface identification.
Priority
: User-specified router priority for the interface. The valid range is 0 - 255 and the default is 1.
Passive Interface
: Check the box to indicate that the interface is passive.
Cost
: User-specified cost for this interface. It's link state metric for the interface. The field is significant only
when '
IsSpecificCos
t' is TRUE. The valid range is 1 - 65535 and the default setting is 'Auto’ cost mode.
Hello Interval
: The number of Hello packets to be sent per second. The valid range is 1 - 65535 and the default
value is 10 per second.
OSPF uses Hello packets and two timers to check if a neighbor is still alive:
Hello
Interval
defines how often the hello packet is sent.
Dead
Interval
defines how long to wait for hello packets before declaring the neighbor dead.
The hello and dead interval values can be different based on the OSPF network type.
Dead Interval
: The time interval (in seconds) between hello packets. The valid range is 1 - 65535 and the default
value is 40 seconds.
Retransmit Interval
: The time interval (in seconds) between link-state advertisement (LSA) retransmissions for
adjacencies. The valid range is 3 - 65535 seconds and the default value is 5 seconds.
Buttons
Apply
: Click to save changes.
Reset
: Click to undo any changes made locally and revert to previously saved values.
