Lantronix
SM12XPA Web User Guide
33848 Rev. A
Page
368
of
473
Routing Status
This page displays the OSPF6 routing status table. Each page shows up to 999 table entries, selected with the
"entries per page" input field. When first visited, the web page shows the beginning entries of this table.
The "Start from Route Type" input field lets you change the starting point in this table.
At the “Destination” input field enter the IPv6 address of the destination.
At the “Area” input field enter the area IP area address.
At the “NextHop” input field enter the IPv6 address of the next hop.
Codes:
i
– Intra-area Router Path,
I
- Inter-area Router Path
OSPF6 Routing Status
Parameter descriptions
:
Route Type
: At the dropdown select the OSPF6 route type:
Intra Area
: The destination is an OSPF6 route which is located on intra-area (default).
Inter Area
: The destination is an OSPF6 route which is located on inter-area.
Border Router
: The destination is a border router.
External Type-1
: The destination is an external Type-1 route.
External Type-2
: The destination is an external Type-2 route.
Destination
: Network and prefix (example 10.0.0.0/16) of the given route entry.
Area
: Indicates which area the route or router can be reached via/to.
NextHop
: An Ipv6 address represented as human readable test as specified in IETF
Cost
: The cost of the route.
AS Cost
: The cost of the route within the OSPF6 network. It is valid for External Type-2 routes and is always '0'
for other route types.
Border Router Type
: The border router type of the OSPF6 route entry.
i-ABR
: The border router is an ABR.
i-ASBR
: The border router is an ASBR located on Intra-area.
I-ASBR
: The border router is an ASBR located on Inter-area.
i-ABR/ASBR
: The border router is an ASBR attached to at least 2 areas.
Interface
: The interface where the IP packet is outgoing.
IsConnected
: The destination is connected directly or not.
