Lantronix
SM12XPA Web User Guide
33848 Rev. A
Page
396
of
473
Leave this field empty for automatic selection based on routing configuration.
Note
: You may only specify either
the VID or the IP Address for the source interface.
Quiet (only print result)
: Checking this option will not print the result of each Ping request but will only show
the final result.
After you press Start, ICMP packets are transmitted, and the sequence number and round trip time are
displayed upon reception of a reply.
The amount of data received inside of an IP packet of type ICMP ECHO_REPLY will always be 8 bytes more than
the requested payload data size (the difference is the ICMP header).
The page refreshes automatically until responses to all packets are received, or until a timeout occurs.
Ping output looks like this:
PING 172.16.1.1 (172.16.1.1) from 172.16.1.10: 56 data bytes
64 bytes from 172.16.1.1: seq=0 ttl=64 time=2.034 ms
64 bytes from 172.16.1.1: seq=1 ttl=64 time=1.729 ms
64 bytes from 172.16.1.1: seq=2 ttl=64 time=1.954 ms
64 bytes from 172.16.1.1: seq=3 ttl=64 time=1.699 ms
64 bytes from 172.16.1.1: seq=4 ttl=64 time=1.916 ms
--- 172.16.1.1 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 1.699/1.866/2.034 ms
Buttons
Start
: Click the button to start to ping the target IP Address.