Lantronix
SM12XPA Web User Guide
33848 Rev. A
Page
450
of
473
B-3. Related Devices
MRP is implemented at FW v7.10.2368 for SISPM1040-384-LRT-C, SISPM1040-362-LRT, SISPM1040-582-LRT,
SISGM1040-284-LRT, SISPM1040-3166-L, and SISPM1040-3248-L.
B-4. MRP Sample Setup
The example below shows SISPM1040-384-LRT-C switches (one MRM and five MRCs).
Figure: MRP Sample Setup
B-5. MRP Pre-Requisites (General)
The following are required to perform MRP setups.
1.
Spanning Tree must be disabled at Configuration > Spanning Tree > CIST Port.
2.
Other Ring technologies must also be disabled (G.8031 EPS, G.8032 ERPS, Rapid-Ring, Ring-To-Ring, etc.).
3.
Only one MRM (Manager) is supported per ring.
4.
Other pre-requisites may apply to the specific examples below.
5.
One Manager Admin Role is supported.
