Lantronix
SM12XPA Web User Guide
33848 Rev. A
Page
61
of
473
Port Status
This page provides a Port Status overview for all LACP instances. To display the LACP Port status in the web UI:
1.
Click Port Management, Link Aggregation and Port Status.
2.
To automatically refresh the information, click “Auto-refresh”.
3.
Click “Refresh” to refresh the LACP Port Status.
Figure 3-5.6: LACP Status
Parameter descriptions
:
Port
: The switch port number.
LACP
: 'Yes' means that LACP is enabled and the port link is up. 'No' means that LACP is not enabled or that the
port link is down. 'Backup' means that the port could not join the aggregation group but will join if other port
leaves. Meanwhile it's LACP status is disabled.
Key
: The key assigned to this port. Only ports with the same key can aggregate together.
Aggr ID
: The Aggregation ID assigned to this aggregation group. IDs 1 and 2 are GLAGs while IDs 3-14 are LLAGs.
Partner System ID
: The partner's System ID (MAC address).
Partner Port
: The partner's port number connected to this port.
Partner Prio
: The partner's port priority.
Buttons
Auto-refresh
: Check this box to refresh the page automatically every 3 seconds.
Refresh
: Click to manually refresh the page immediately.