Lantronix
SM12XPA Web User Guide
33848 Rev. A
Page
227
of
473
Access Control List
This page shows the Access Control List (ACL), which is made up of the ACEs defined on this switch. Each row
describes an ACE that is defined. The maximum number of ACEs is 512 on each switch.
Click on the lowest plus sign to add a new ACE to the list. Reserved ACEs are used for internal protocol and
cannot be edited or deleted; the order sequence cannot be changed, and the priority is highest.
To configure Access Control List in the web UI:
1.
Click Access Control and Access Control List.
2.
Click the
button to add a new ACL, or use the other ACL modification buttons to specify the editing
action (i.e., edit, delete, or moving the relative position of entry in the list)
3.
Specify the ACE parameters.
4.
Click the Apply button to save the settings
5.
To cancel the settings click the Reset button. It will revert to previously saved values.
6.
When editing an entry on the ACE Configuration page, note that the items displayed depend on various
selections, such as Frame Type and IP Protocol Type. Specify the relevant criteria to be matched for this rule
and set the actions to take when a rule is matched (e.g., Rate Limiter, Port Copy, Logging, and Shutdown).
Figure 12-3: Access Control List Configuration
Parameter descriptions
:
ACE
: Indicates the ACE ID.